Download Infinix Hot 4 X557 Official Stock ROM >>> 1.32GB
Download Official Infinix Hot 4 X557 Stock ROM And How To Flash It With Sp Flash Tool
Download Official Infinix Hot 4 X557 Stock ROM here @ Jboytech. some specification of Hot 4 Infinix X5557 it comes with android 6.0 right out of the container, 5.5 inch screen show, 16GB ROM and 2GB ram, 8Mp back camera and 5Mp front confronting camera furthermore a tremendous 4000mAH battery.
-Download VCOM Drivers
-Download SP Flash tool ( More information here )
How to Flash the Infinix Hot 4 X557 official stock ROM
-First of all, before anything, you have to download and extract the required tools from the link above and also the ROM which will be provided in the link below to a folder. (unzip using winrar)
-Once extracted, Launch the VCOM driver (if you don’t have never installed it on your PC) then disable driver signature enforcement on windows 8, windows 8.1 and windows 10. and install the necessary drivers, now the purpose of installing these drivers is that without them, nothing will work.
-Once you are done setting up the VCOM drivers, open the folder you extracted SP flash tool to and double click on the SP flash tool software to launch it, or better still right click on it and “run as administrator”.
-After SP flash tool must have loaded, click on “scatter loading” then locate and select scatter file from the extracted folder.
-Once selected, click on the drop down menu, by the far left and select “firmware upgrade”.
-now go turn on developer mode on your infinix hot 4 X557, (go to settings, click on about and click on build number 7 times and developer options will be turned on, click on developer options, locate USB debugging and activate).
-Once done with the above procedure, switch off your Infinix hot 4 and connect it to PC via a USB cable.
-Once connected, click on “download”, you should see a running progress bar in SP flash tool, while process is running,do not interrupt the process nor tamper with the USB cable.
-Once it finishes running, you should see a good green mark, after which disconnect the USB cable from the device and reboot.